Polaris RANGER 500 2017 Service Manual page 184

ENGINE / COOLING SYSTEM
25. Install the water pump drive shaft holding tool in kit
PU-50869. Hold the tool in position and flip the
assembly up-side-down so the special tool PU-
50869 is supporting the assembly.
26. Lubricate the new water pump oil seal with clean
engine oil.
3.28
27. Use the water pump oil seal installation tool in kit PU-
50869 to fully install the new water pump oil seal
Be sure the oil seal is fully seated in cover or severe
engine damage may result.
28. Use the water pump mechanical seal installation tool
in kit PU-50869 to fully install the new water pump
d
mechanical seal until it is fully seated in the cover.
29. Install a new stator cover gasket onto the engine.
30. Align the water pump drive slot as shown below.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
CAUTION
© Copyright Polaris Inc.
s
.