Crew; Pad Removal - Crew - Polaris RANGER 500 2017 Service Manual

Hide thumbs Also See for RANGER 500 2017:

Table of Contents

BRAKE SYSTEM

CREW

1. Elevate and support front of vehicle.

Use care when supporting vehicle so that it does not tip

Severe injury may occur if machine tips or falls.

2. Remove the wheel nuts, washers and front wheel.

Loosen pad adjuster screw (Item 1) 2-3 turns.

3. Remove the upper and lower caliper mounting bolts

and remove the caliper from the front hub.

When removing caliper, use care not to damage brake

line. Support caliper so to avoid kinking or bending

4. Push caliper piston into caliper bore slowly using a

C-clamp or locking pliers with pads installed.

Brake fluid will be forced through compensating port

into master cylinder fluid reservoir when piston is

pushed back into caliper. Remove excess fluid from

reservoir as required.

5. Push mounting bracket inward and slip outer brake

pad past edge. Then remove inner pad.

9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual

Table of Contents