Ect Sensor Replacement - Polaris RANGER 500 2017 Service Manual

ECT SENSOR REPLACEMENT - 570

1. Lift the rear cargo box
2. Drain coolant to level below sensor.
3. Disconnect harness from the sensor
4. Using a wrench, remove and replace the sensor,
applying a light coating of thread sealant to aid
installation.
5. Torque the sensor to specification.
TORQUE
ETC Fasteners
7 ft-lbs (10 N·m)
6. Add the required amount of coolant and properly
bleed the cooling system (see Engine chapter).
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.
q
.
ENGINE ELECTRICAL
4.11
4