Shift Lever; Removal; Installation - Polaris RANGER 500 2017 Service Manual

TRANSMISSION

SHIFT LEVER

REMOVAL

1. Remove the shift knob cover
e
and shift knob from the shift lever
2. Remove the screws retaining the center console
using a T27 and T30 Torx driver. Remove the
console from the vehicle.
t
3. Remove the clip and washer
u
cable to the shift lever and disconnect the cable
end from the lever.
4. Remove the retaining ring
off the mounting bracket and out from the frame.
7.8
q w
, retaining screw
r
.
y
retaining the shift
i
and slide the shift lever
5. Remove both bushings
service as needed.

INSTALLATION

1. Perform the removal steps in reverse order to install
the gear shift lever (lever, cable, console, shift knob)
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
o
from the shift lever and
© Copyright Polaris Inc.