Brake Pad Inspection - Polaris RANGER 500 2017 Service Manual

5. Push caliper piston into caliper bore slowly with pads
installed.
NOTICE
Brake fluid will be forced through compensating port
into master cylinder fluid reservoir when piston is
pushed back into caliper. Remove excess fluid from
reservoir as required.
6. Remove the brake pads.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.

BRAKE PAD INSPECTION

1. Check the brake pads for wear, damage, or
looseness.
2. Inspect the brake pad wear surface for excessive
wear.
MEASUREMENT
Brake Pad
.030" (0.762 mm)
3. If any one pad is less than the service limit then all
pads should be replaced.
BRAKE SYSTEM
10
10.27