Polaris RANGER 500 2017 Service Manual page 245

Engine Coupler (Rear)
Exhaust Head Pipe Bolts
IAC Mounting Screw
Camshaft Sprocket Bolt
Oil Gallery Plug:
Oil Filter
Oil Pan Drain Plug
Oil Pickup
Oil Pressure Regulator
Oil Pressure Regulator Valve Cover
Oil Pump Sprocket Bolt
Oil Pump Cover Bolt
Spark Plug
Starter Mounting Bolts
Starter One-Way Clutch Screws
Stator Cover Screws
Stator Wire Routing Bolts
Thermostat Cover Bolts
T-MAP Retaining Bolt
TPS Mounting Screws
Valve Cover Bolts
Voltage Regulator Fasteners
Water Pump Cover Bolts
Water Pump Impeller
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.
ENGINE / COOLING SYSTEM
In Sequence:
55 ft-lb (75 Nm)
18 ft-lb (25 Nm)
18 in-lbs (2 Nm)
14 ft-lbs (19 N·m) Replace camshaft sprocket bolt if
loosened or removed.
11 ft-lbs (15 Nm)
Lubricate seal with engine oil. Turn by hand until
filter gasket contacts sealing surface, then turn an
additional 3/4 turn.
12 ft-lbs (16 N·m)
9 ft-lbs (12 N·m)
20 ft-lbs (27 N·m)
7 ft-lbs (10 N·m)
9 ft-lbs (12 N·m)
8 ft-lbs (11 Nm)
9 ft-lbs (12 N·m) Do Not Apply Anti-Seize
3 ft-lbs (4 Nm)
9 ft-lbs (12 Nm)
Apply Loctite® 272™
9 ft-lb (12 Nm)
6 ft-lbs (9 Nm)
Apply Loctite® 242™
7 ft-lbs (10 Nm)
24 in-lbs (2.8 Nm)
18 in-lbs (2 Nm)
9 ft-lbs (12 Nm)
75 in-lb (6 Nm)
9 ft-lbs (12 Nm)
(Apply Loctite® 204™ to bolt threads)
Finger Tight *LH threads
3
3.89