Advertisement
Caponord 1200 - Caponord 1200 Rally
Specification
Crankcase class A
Crankcase class B
See also
Removing the flywheel cover
Crankcase class (internal marking on second
generation crankcases)
Two different crankcase classes (A or B) are avail-
able, selected in relation to the centre-to-centre
distance between the primary reduction gears.
The class is indicated on the clutch side crankcase
half, in the gearbox control mechanism area.
NOTE
IF THE CRANKCASE IS REPLACED, IT WILL BE SUPPLIED
WITH THE PRIMARY REDUCTION GEAR ALREADY COU-
PLED.
Specification
Crankcase class A
Crankcase class B
Class one
Two different pinion classes (A or B) are available,
selected in relation to the centre-to-centre dis-
tance between the primary reduction gears.
On class B pinions only, the class is indicated on
the pinion itself.
See also
Removing the flywheel cover
Crankshaft class (crank pin)
There are four different classes of crankshaft avail-
able (0, 1, 2, 3), selected in relation to crank pin
diameter.
There are four different classes of crankshaft avail-
able (E1, E2, ...) selectable in relation to connect-
ing rod weight.
Key:
C
01
RANKCASE CLASSES
Centre distance: 110.50 - 110.54 mm (4.3504 - 4.3519 in)
Centre distance: 110.46 - 110.50 mm (4.3488 - 4.3504 in)
C
02
RANKCASE CLASSES
Centre distance: 110.50 - 110.54 mm (4.3504 - 4.3519 in)
Centre distance: 110.46 - 110.50 mm (4.3488 - 4.3504 in)
Characteristics
Desc./Quantity
Desc./Quantity
CHAR - 63
Advertisement
