APRILIA Caponord 1200 2016 Manual page 351

Caponord 1200 - Caponord 1200 Rally
pos. Description
1 Engine speed sensor fixing screw
2 Screw fastening flywheel side /
clutch side crankcase halves
3 Screw fastening flywheel side /
clutch side crankcase halves
4 Special calibrated screw for gearbox
lubrication
Splitting the crankcase halves
•
Remove the clutch.
•
Remove the complete flywheel.
•
Remove the selector.
•
Remove the starter motor.
•
Remove the oil filter.
•
Fit the special tool, tightly fastening the
three screws securing the tool onto the
crankcase.
•
Unscrew and remove the crankshaft
fastener nut anticlockwise using the
special tool, retrieving the washer and
the water pump drive gear.
Specific tooling
020850Y Primary gear lock
C 2
RANKCASE
Type Quantity
M6 1 13 Nm (9.59 lbf ft)
M6 8 13 Nm (9.59 lbf ft)
M8 9 29 Nm (21.39 lbf ft)
- 1 18 Nm (13.28 lbf ft)
Torque Notes
Loctite 243
-
-
-
ENG - 351
Engine