Caponord 1200 - Caponord 1200 Rally
•
While holding the front wheel remove
the wheel axle (6).
•
Collect the spacer from the front wheel right side.
Checking
FRONT WHEEL BEARINGS
Check the bearings installed on the wheel.
CHECK THE CONDITION OF ALL COMPONENTS AND OF THE COMPONENTS INDICATED AS
FOLLOWS IN PARTICULAR.
CHECKING ROTATION
•
Manually rotate the inner race of each bearing. The race must turn smoothly without im-
pediment or noise.
If one or both bearings are not conformant:
•
Replace both wheel bearings.
CHECKING RADIAL AND AXIAL PLAY
•
Check the radial and axial play.
Axial play: minimal axial play is permitted.
Radial: none.
If one or both bearings are not conformant:
•
Replace both wheel bearings.
ALWAYS REPLACE BOTH BEARINGS.
ALWAYS REPLACE THE BEARINGS WITH COMPONENTS OF THE SAME TYPE.
SEALS
•
Check the condition of the seals; replace if damaged or excessively worn.
ALWAYS REPLACE BOTH SEALS TOGETHER.
ALWAYS REPLACE THE SEALS WITH COMPONENTS OF THE SAME TYPE.
Chassis
CHAS - 421