Advertisement
Electrical system
Check the presence of the clamp that holds the
horn cables secure.
•
Small plastic clamp 2.5x160 mm
(0.1x6.3 in).
TABLE H - FRONT HEADLAMP
Check that the relays are correctly fastened and
that the ends are pulled out of the seats once the
component is inserted. Also check for the correct
connection of all the bulbs and the correct routing
of the cable harness.
1. Headlamp screw gasket.
2. Cable guide.
3. Headlamp screw gasket.
TABLE I - IGNITION SWITCH ASSEMBLY CABLE ROUTING
The aerial cable must be routed behind the key
contacts cable in order to prevent the tank from
damaging it.
ELE SYS - 106
Caponord 1200 - Caponord 1200 Rally
Advertisement
