Advertisement
Caponord 1200 - Caponord 1200 Rally
CAUTION
THE PROTECTIVE SHEATH IN THE SUPPLY CABLES OF
THE ADDITIONAL HEADLAMPS COULD, DURING THE AS-
SEMBLY, LOOSE THE CORRECT POSITION AND UNCOV-
ER THE SUPPLY CABLES AND RISK DAMAGE OR EVEN
THE BREAKAGE OF THE SUPPLY CABLES. IF THIS OC-
CURS, MALFUNCTION OR EVEN NON-USE OF THE ADDI-
TIONAL HEADLAMPS CAN BE VERIFIED. TO BRING THE
PROTECTIVE SHEATH AGAIN TO THE CORRECT POSI-
TION, PROCEED AS INDICATED IN THE FOLLOWING.
The procedure applies for both additional head-
lamps.
•
Undo and remove the three fixing
screws (1).
•
Remove the lower fork plate (2) and the
horn (3).
•
Unhook the supply cable from its cable
grommet (4).
•
Slide the sheath downwards until it
completely covers the supply cable of
the additional headlamp.
•
Apply, in the points indicated in the fig-
ure, a clamp around the sheath so to
block it in is chosen position.
Pre-delivery
PRE DE - 557
Advertisement
