Caponord 1200 - Caponord 1200 Rally
Installing the flywheel
•
Apply the wrench to the crankshaft.
•
Insert the starter's transmission gear,
after having coated it with a layer of
grease.
•
Insert the flywheel on the crankshaft.
•
Screw the screw together with the
washer but without tightening.
•
Place the appropriate tool for locking
the flywheel.
•
Locking the flywheel in position, using
the specific tool, tighten the screw on
the crankshaft.
WARNING!:
TO APPLY THE CORRECT TIGHTENING TOR-
QUE, CHECK THE MEASUREMENT OF THE
SCREW THAT MAY BE M12 OR M14.
•
Remove the special tool.
Engine
ENG - 301