Caponord 1200 - Caponord 1200 Rally
•
Collect the inner O-ring rings (7) and
completely remove the transmission
chain.
SPROCKET REMOVAL
•
Carry out the removal of the rear wheel
•
Remove the sprocket from the sprock-
et guard.
•
Unscrew and remove the five nuts (1).
•
Remove the sprocket (2)
inspection
To check the wear of the drive chain, use the chain
checking instrument, P/N: Ognibene -
529510001.
The different chain pitches which may be checked
with the instrument are indicated on the instrument
itself. There are three reference markings for each
chain pitch indicated on the instrument. These in-
dicate (from right to left) the correct measurements
for:
1. New chain with length near nominal value;
2. Chain with chain stretch of 1.5%;
3. Chain with chain stretch of 3%, which must
therefore be replaced in accordance with ap-
plicable legislation.
Chassis
CHAS - 435