Advertisement
Electrical system
•
Faulty sensor or missing sensor/tone wheel or excessive distance between the sensor and
the tone wheel.
Troubleshooting:
•
Check that the speed sensor and the tone wheel are installed. If they are not, install them.
If they are, check the speed sensor retainer. If it is not OK, restore it. If it is, check if the tone
wheel has the correct number of teeth or if it is dirty, deformed or wrongly fixed. If it is not
OK, replace the tone wheel and if it is OK, replace the speed sensor.
5D95 excessive measured speed
•
Faulty sensor or tone wheel, or tone wheel with wrong number of teeth or wrong tyre size.
Troubleshooting:
•
Check that the speed sensor and the tone wheel are installed. If they are not, install them.
If they are, check the speed sensor retainer. If it is not OK, restore it. If it is, check if the tone
wheel has the correct number of teeth or if it is dirty, deformed or wrongly fixed. If it is not
OK, replace the tone wheel and if it is OK, check that the tyre size is the correct one. If it is
not OK, replace it. If it is OK, check that the tyre pressure is the correct one. If it is not OK,
restore it; if it is OK, replace the speed sensor.
VEHICLE REAR SPEED SENSOR
FUNCTION:To indicate the vehicle speed by read-
ing the rear wheel turning speed.
OPERATION / OPERATING PRINCIPLE:Magne-
toresistive sensor: a square-wave pulse is gener-
ated with voltage approx. between 11.55 V and
11.25 V
WIRING DIAGRAM Level in wiring diagram: ABS.
REMOVAL
LOCATION ON THE VEHICLE:on the swingarm,
right side, under the chain tension screw.
CONNECTOR LOCATION (if available): under
the saddle, right side.
PINS
•
PIN 1- Ground connection (yellow)
•
PIN 2 - Power supply voltage/Output
signal (yellow/brown)
DIAGNOSIS INSTRUMENT
Parameters: Speed (km/h) - Vehicle speed.
ELECTRICAL ERRORS
ELE SYS - 176
Caponord 1200 - Caponord 1200 Rally
Advertisement
