Advertisement
Suspensions
Pos.
Description
1
Headstock ring nut - pre-tightening
1
Headstock ring nut - tightening
2
Headstock cap
3
TCEI screw fastening fork stan-
chions to bottom yoke
4
TCEI screw fastening U-bolt onto
fork yoke
5
TCEI screw fastening fork stan-
chions to top yoke
6
Headstock counter-lock ring
Removing the fork legs
•
Remove the front wheel.
•
Support the stanchion and loosen the
screws on the upper and then the lower
plate.
•
Remove the stanchion.
FOR THE ADD VERSION, THE PRESSURE
SENSOR MUST BE DISCONNECTED BEFORE
REMOVING THE LEFT STEM.
•
Undo and remove the sensor fixing
screw located on the fork head.
CAUTION
TO AVOID OIL LEAKAGE FROM THE STEM WHEN RE-
MOVING THE PRESSURE SENSOR, REPLACE IT WITH A
CAP. AS AN ALTERNATIVE, DO NOT PLACE THE STEM
HORIZONTALLY.
SUSP - 378
Caponord 1200 - Caponord 1200 Rally
S
TEERING
Type
Quantity
M25x1
1
M25x1
1
50 +/- 5 Nm (36.88 +/-
M22x1
1
100 Nm (73.75 lb ft)
M8x35
4
M10x60
2
M8x30
2
M25x1
1
Torque
60 Nm (44.25 lb ft)
Unscrew after pre-
tightening
3.69 lb ft)
25 Nm (18.44 lb ft)
50 Nm (36.88 lb ft)
25 Nm (18.44 lb ft)
-
Manually screw
Notes
-
-
-
-
-
Advertisement
