Advertisement
Caponord 1200 - Caponord 1200 Rally
Removing the clutch cover alone is only recom-
mended when replacing the clutch plates. When
removing the entire clutch assembly, removing the
clutch side cover is recommended.
However, removing the entire clutch assembly is
possible by removing the clutch cover alone. In this
case, proceed as follows:
•
measure the projection of the clutch
housing from the crankcase before dis-
assembling;
•
when refitting, check that the projection
has not changed before tightening the
clutch nut. If the projection has
changed, rotate the crankshaft to cor-
rectly engage the engine oil pump drive
gear on the clutch housing with the oil
pump driven gear.
Disassembling the clutch
pos.
Description
1
Clutch spring fastener screw
C
LUTCH
Type
Quantity
M6
6
11 Nm (8.11 lb ft)
Torque
Notes
-
ENG - 305
Engine
Advertisement
