Pre-delivery
•
Insert the supply cable again inside the
cable grommet (4) and refit the lower
fork plate (2).
•
The clamp is visible in the point indica-
ted in the figure.
WARNING
DURING THE PREVIOUSLY DESCRIBED OPERATIONS, IT IS POSSIBLE THAT THE ELECTRIC
CONNECTOR OF THE ADDITIONAL HEADLAMP IS DISCONNECTED AND CAUSES THE NON-
USE OF THE ADDITIONAL HEADLAMP. IF THIS OCCURS, PROCEED AS INDICATED IN THE
FOLLOWING.
•
Connect the connector (5) as indicated
in the figure.
•
Insert the connector in the special seat
in the zone below the air deflector.
•
Fix the connector in the special hook
indicated in the figure.
PRE DE - 558
Caponord 1200 - Caponord 1200 Rally