Output Power; Gnss Receiver Characteristics - Quectel RM510Q-GL Hardware Design

5G NR-TDD n78 (20 MHz)
(SCS: 30 kHz)
5G NR-TDD n79 (40 MHz)
(SCS: 30 kHz)
NOTE
1)
SIMO is a smart antenna technology that uses a single antenna at the transmitter side and two
antennas at the receiver side, which improves the Rx performance.

5.2.3.3. Output Power

The following table shows the RF output power of the module.
Table 36: Sub-6&LTE&WCDMA Output Power of the Module
Mode Frequency
WCDMA WCDMA bands
LTE bands
LTE
LTE HPUE bands
(B38/B40/B41/B42/B43)
5G NR bands
5G NR
5G NR HPUE bands
(n41/n77/n78/n79)
NOTE
1)
For 5G NR TDD bands,

5.2.4. GNSS Receiver Characteristics

The module includes a fully integrated global navigation satellite system solution (GPS, GLONASS,
BeiDou/COMPASS, and Galileo).
The module supports standard NMEA 0183 protocol, and outputs NMEA sentences at 1 Hz data update
rate via USB interface by default.
RM510Q-GL_Hardware_Design
Max.
24 dBm +1/-3 dB (Class 3)
23 dBm ±2 dB (Class 3)
26 dBm ± 2 dB (Class 2)
23 dBm ±2 dB (Class 3)
26 dBm +2/-3 dB (Class 2)
the normative reference for this requirement is TS 38.101-1 clause 6.3.1
RM510Q-GL Hardware Design
-86.0 -87.5
-86.0 -86.5
5G Module Series
-89.0 -92.9 dBm
-89.5 -89.7 dBm
Min.
< -50 dBm
< -40 dBm
< -40 dBm
< -40 dBm
1)
(BW: 5–20 MHz)
< -40 dBm
1)
(BW: 5–20 MHz)
62 / 87