Rf Characteristics; Mmwave If Interfaces; Pin Definition - Quectel RM510Q-GL Hardware Design

5

RF Characteristics

This chapter mainly describes RF characteristics of the module.

5.1. mmWave IF Interfaces

5.1.1. Pin Definition

Eight mmWave IF interfaces are provided for the module's supported FR2 (mmWave) bands n257, n258,
n260, and n261. The following table lists the definition of these mmWave IF interfaces.
Table 30: Pin Definition of mmWave IF Interfaces
mmWave IF
I/O
Interface
IFH1 AIO
IFH2 AIO
IFH3 AIO
IFH4 AIO
IFV1 AIO
IFV2 AIO
IFV3 AIO
IFV4 AIO
RM510Q-GL_Hardware_Design
Functional Description
Horizontal polarization IF output signal and control signal for mmWave
RFIC device 1
Horizontal polarization IF output signal and control signal for mmWave
RFIC device 2
Horizontal polarization IF output signal and control signal for mmWave
RFIC device 3
Horizontal polarization IF output signal and control signal for mmWave
RFIC device 4
Vertical polarization IF output signal and local oscillator (LO) signal for
mmWave RFIC device 4
Vertical polarization IF output signal and LO signal for mmWave RFIC
device 3
Vertical polarization IF output signal and LO signal for mmWave RFIC
device 2
Vertical polarization IF output signal and LO signal for mmWave RFIC
device 1
5G Module Series
RM510Q-GL Hardware Design
55 / 87