Icom ID-52A Advanced Manual page 213

12
SET MODE
Bluetooth Set
Power Save
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > Power Save
Selects whether or not to operate with the Power Save
mode while the optional VS-3 headset is connected�
L When a headset (user supplied) or a data device is
connected, the Power Save mode is automatically turned
OFF, regardless of this setting�
• OFF: Turns OFF the function�
• ON: The Power Save mode is enabled when no
communication or operation is performed for
120 seconds�
One-Touch PTT
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > One-Touch PTT
Sets the One-Touch PTT function when the optional
VS-3 headset is connected�
This function enables you to transmit without
continuously holding down [PTT]�
L When a headset (user supplied) is connected, this
function is automatically turned ON, regardless of this
setting�
• OFF: Transmits while holding down [PTT]�
• ON: Pushing [PTT] toggles between transmit and
receive�
PTT Beep
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > PTT Beep
Sets the beep sound when you push [PTT] on the
optional VS-3 headset�
• OFF: No beep sounds�
• ON: A beep sounds�
Custom Key Beep
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > Custom Key Beep
Sets the beep sound when you push the Custom Key
([PLAY]/[FWD]/[RWD]) on the optional VS-3 headset�
• OFF: No beep sounds�
• ON: A beep sounds�
Custom Key
(Default: OFF)
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > Custom Key
Assigns the functions to the Custom Key ([PLAY]/
[FWD]/[RWD]) on the optional VS-3 headset�
L See page 12-35 about the functions�
Serialport Function
[MENU] > SET > Bluetooth Set > Data Device Set >
Serialport Function
(Default: OFF)
Sets the serial port function for the Bluetooth SPP
(Serial Port Profile) connection to a data device, PC,
and so on�
• CI-V (Echo Back OFF):
• CI-V (Echo Back ON):
• DV Data: Transmits or receives data in the DV
(Default: OFF)
Bluetooth Device Information
[MENU] > SET > Bluetooth Set >
Bluetooth Device Information
Displays the Bluetooth device information�
Initialize Bluetooth Device
(Default: OFF)
[MENU] > SET > Bluetooth Set >
Initialize Bluetooth Device
Initializes the installed Bluetooth unit�
12-34
(Default: [PLAY]: ---
(Default: CI-V (Echo Back OFF))
Transmits or receives a CI-V command�
Does not send back the serial data
received from the SPP connection�
Transmits or receives a CI-V command�
Sends back the serial data received from
the SPP connection�
mode�
Does not input the cloning or weather
data entries, or output the GPS data�
[FWD]: UP
[RWD]: DOWN)