Ddirectly Entering (Rpt) - Icom ID-52A Advanced Manual

5
D-STAR OPERATION (ADVANCED)
"TO" (Destination) setting

DDirectly entering (RPT)

The destination repeater call sign can be directly
entered�
NOTE: BE SURE to include a node letter as the 8th
digit� See page 5-2 "IMPORTANT" about the node
letters�
Example: Directly entering the call sign "JP3YDH A�"
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select "TO," and then push [ENT]�
3� Select "Direct Input (RPT)�"
4� Enter a call sign of up to 8 characters, including
spaces�
L See page iii on how to enter characters�
5� After entering, push [ENT]�
• Returns to the DR screen and "JP3YDH A" is
displayed in "TO�"
L After entry, you can edit the call sign in the DIRECT
INPUT (RPT) screen�
L The entered call sign remains on the DIRECT INPUT
(RPT) screen until you enter a new call sign�
TIP:
• If the entered call sign is duplicated in the repeater list,
the name is displayed in "TO" (Only when the name has
been entered)�
• When directly entering the repeater call sign, including a
"/" at the beginning is also correct�
5-12