Dusing "Your Call Sign; Dusing Rx History - Icom ID-52A Advanced Manual

5
D-STAR OPERATION (ADVANCED)
"TO" (Destination) setting

DUsing "Your Call Sign"

The "Your Call Sign" memory saves individual or
repeater station call signs� When you select the call
sign for the "TO" (Destination) setting, you can make
a Gateway call� When you call an individual station
through a gateway, the signal is automatically sent to
the last repeater that the individual station accessed�
Therefore, even if you do not know where the
individual station is located, you can make a call�
NOTE: If the repeater, set in "FROM" (access
repeater), has no Gateway call sign, you cannot
make a gateway call�
Example: Selecting "Rick" from "Your Call Sign�"
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select "TO," and then push [ENT]�
3� Select "Your Call Sign�"
4� Select a destination name or call sign�
• Returns to the DR screen, and the selected name is
displayed in "TO�"
TIP: After selecting a destination, you can select
another station preset in your transceiver by rotating
[DIAL]�

DUsing RX History

When a call is received in the DV mode, the call data
is saved in the RX History�
Up to 50 callers, and only the last called call signs, a
total of 51 histories can be saved�
Example: Selecting "Rick" in the RX History�
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select "TO," and then push [ENT]�
3� Select "RX History�"
4� Select a destination name or call sign�
• Returns to the DR screen, and the selected name is
displayed in "TO�"
L The "*" (asterisk) is displayed at the beginning of the
called station's call sign� (p� 5-19)
TIP: To add an RX HISTORY data to the "Your Call
Sign" memory, push [QUICK], then select "Add To
Your Memory�"
5-10