Dsetting The Gps Alarm Function To Rx (A Caller Station) - Icom ID-52A Advanced Manual

6
GPS OPERATION (ADVANCED)
GPS Alarm

DSetting the GPS Alarm function to RX (a caller station)

[MENU] > GPS > GPS Alarm
1� Push [MENU]�
2� Select "GPS Alarm" in the "GPS" menu�
3� Select "Alarm Select�"
4� Select "RX�"
• Returns to the GPS ALARM screen�
L If you want to set the alarm to a specific GPS
Memory group, select "Memory" and then select a
GPS Memory in a GPS Memory group�
L To exit the MENU screen, push [MENU]�
L Information
• When a station with its GPS Alarm set enters within an
approximate 1 kilometer (1094 yards) range, it sounds
once� When it enters within an approximate 500
meters (547 yards) range, the alarm sounds 3 times�
• When the transceiver sounds a GPS Alarm, "GPS
ALARM" is displayed on the screen, and " " blinks�
See the illustration below�
• To cancel the GPS Alarm function, select "OFF" in step
4 to the left�
"GPS ALARM" is displayed on the screen
and the alarm sounds 3 times�
NOTE: Even if "RX" is selected in step 4, when the
received signal has no position data, the GPS Alarm
does not sound�
TIP: When selecting "RX" or a specific GPS Memory
in step 4 to the left, you also have to set the "Alarm
Area (RX/Memory)" to use the GPS Alarm function�
(p� 6-44)
([MENU] > GPS > GPS Alarm > Alarm Area (RX/Memory))
6-29
Blinks
GPS ALARM