Dauto Position Reply Function; Message; Status (Blank) - Icom ID-52A Advanced Manual

5
D-STAR OPERATION (ADVANCED)
Automatic Reply function

DAuto Position Reply function

When you receive a call addressed to your call sign,
but are in a situation that makes it difficult to operate
the transceiver, this function sounds beeps and
automatically replies with your call sign and transmits
your position data�
After receiving the Auto Position Reply call, the
caller's position data is displayed in a window�
L Icom transceivers* display the position after receiving a
call�
L You can turn OFF the caller's position display� (p� 12-26)
([MENU] > SET > Display > Reply Position Display)
* Except for the ID-31A/E, IC-9100, ID-880H/E880, IC-
80AD/E80D, IC-92AD/E92D, IC-2820H/E2820, ID-800H,
IC-91AD/E91, IC-V82, IC-U82
When no valid position data is received
After receiving a call addressed to your call sign,
the internal GPS receiver is temporarily turned ON
for approximately 5 minutes to receive your position
data, even if "GPS Select" is set to "OFF" or "Manual�"
Then, the transceiver automatically replies with a
message, as described below�
([MENU] > GPS > GPS Set > GPS Select)
L When the internal GPS receiver is temporarily ON, and
valid position data is received, the transceiver transmits
your position data if a call addressed to your call sign is
received again�
Reply message list when no valid position data is
received

Message

No Position
Old Position
No Posi & GPS Start
Old Posi & GPS Start
Status
When no position data is
received�
2 minutes or more has passed
since receiving position data�
The internal GPS receiver is
temporarily turned ON but has
not received your position data
yet�
The internal GPS receiver is
temporarily turned ON, and 2
minutes or more have passed
since receiving position data�
JA3YUA
Your station
3� After receiving, the position data
is displayed on the
destination's transceiver�
Scrolls your call sign or the TX message�
L Your status message may be displayed�
TIP:
• The position data is transmitted according to the
"GPS TX Mode�" (p� 6-12)
• When the "GPS TX Mode" settings are incorrect
for the Automatic Reply function, the transceiver
automatically corrects them to reply to a call�
• When "GPS TX Mode" is set to "OFF," "D-PRS" is
automatically selected�
5-26
1� A call addressed to your
call sign�
2� Your position data
is automatically
transmitted�
Destination
(ID-52A/E)