Dentering New Information Into The Repeater List - Icom ID-52A Advanced Manual

5
D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list

DEntering new information into the repeater list

Step 1. Selecting the repeater group
[MENU] > MEMORY > Repeater List
1� Push [MENU]�
2� Select "MEMORY" on the second page of the
MENU screen�
3� Select "Repeater List�"
4� Select a repeater group to add a repeater to�
• Displays the repeater list of the selected repeater group�
5� Push [QUICK]�
6� Select "Add�"
• The REPEATER LIST EDIT screen is displayed�
Step 2. Selecting the communication type
1� Select "TYPE�"
2� Select the communication type�
• DV Repeater: Repeater operation in the DV mode�
• DV Simplex: Simplex operation in the DV mode�
• FM Repeater: Repeater operation in the FM mode�
• FM Simplex: Simplex operation in the FM mode�
Step 3. Entering the repeater name
1� Select "NAME�"
2� Enter a name of up to 16 characters�
L See page iii on how to enter characters�
3� After entering, push [ENT]�
Step 4. Entering the repeater sub name
1� Select "SUB NAME�"
2� Enter a sub name of up to 8 characters�
L See page iii on how to enter characters�
3� After entering, push [ENT]�
Step 5. Entering the repeater call sign
L When Step 2. Selecting the communication type
is set to "DV Simplex" or "FM Simplex," go to Step
7. Changing the repeater group�
1� Select "CALL SIGN�"
2� Enter the repeater call sign of up to 8 characters,
including spaces and the node letter�
NOTE: BE SURE to add the repeater node letter
in the 8th digit of the call sign, according to the
frequency band shown below� Note that there
are almost always different node letters between
Japanese D-STAR repeaters and repeaters in
other countries�
Cross band operation between different nodes at
the same repeater site can be made�
• 1200 MHz: A (B in Japan)
• 430 MHz: B (A in Japan)
• 144 MHz: C (no repeaters in Japan)
3� After entering, push [ENT]�
Step 6. Entering the gateway repeater call sign
L This item is displayed when Step 2. Selecting the
communication type is set to "DV Repeater�"
L The 8th digit in the call sign entered in Step 5.
Entering the repeater call sign is automatically
set to "G" as the gateway port, so you can skip this
setting and go to the next item�
1� Select "GW CALL SIGN�"
2� Enter a gateway repeater call sign of up to 8
characters, including spaces�
L Only a space or "G" can be entered in the 8th digit�
3� After entering, push [ENT]�
5-32