The unit efficiency diminishes
If the handpiece falls
If there is leakage of powder through
the nozzle
FB-543_4_rev_B_Handy 3 Perio.indd 91
FB-543_4_rev_B_Handy 3 Perio.indd 91
•
Check the amount of powder in your device
•
Check the air pressure of the dental unit
•
Change the nozzle
•
Remove the residual powder in the channels of the handpiece with the EasyClean
•
Send the unit to an approved EMS repair center
AIR-FLOW PERIO handpiece
•
Replace the nozzle and check the fit of the nozzle
•
If the nozzle doesn't hold or it is not watertight, send the handpiece to a certified EMS Repair Center
AIR-FLOW PLUS Handpiece
•
Check the state of the nozzle
•
Replace the handpiece
•
Fill with the Easyfill
•
Reduce the volume of powder in the powder chamber
91
05/02/2020 09:14
05/02/2020 09:14