Modular Interface Card Led In An Ex9200 Switch; Figure 4: Ex9200-40T-Mic - Juniper EX9200 Manual

Related
Documentation

Modular Interface Card LED in an EX9200 Switch

Copyright © 2016, Juniper Networks, Inc.
EX9200-40T-MIC has 40 RJ-45 ports, which can accept RJ-45 connectors. The
ports are divided into three port groups. The ports labeled
through form port group
1/4
2/2 form port group pic1
form port group . See
pic2
Blank panels—Two blank panels that cover the MIC slots.
Line card LED—An LED labeled
Card LED in an EX9200 Switch.
MIC LED—An LED labeled
"Modular Interface Card LED in an EX9200 Switch" on page
Network port LEDs—Each SFP+ port on the EX9200-10XS-MIC and each SFP port on
the EX9200-20F-M-MIC has an LED that indicates the link activity of the port. Each
10/100/1000BASE-T RJ-45 Ethernet network port on tEX9200-40T-MIC has two LEDs
that indicate link activity and status of each port. See
Switch" on page 15.
Line Card Model and Version Compatibility in an EX9200 Switch on page 35
Pluggable Transceivers Supported on EX9200 Switches on page 37
Installing a Line Card in an EX9200 Switch
Installing a MIC in an EX9200-MPC Line Card on page 6
Handling and Storing Line Cards in EX9200 Switches
The Modular Interface Cards (MICs) in the following line cards for EX9200 switches have
an LED labeled on the faceplate that indicates the online status information of
OK/FAIL
MICs.
EX9200-4QS Line Card on page 32
EX9200-MPC Line Card on page 3
EX9200-40F Line Card on page 28
EX9200-40F-M Line Card on page 30
EX9200-40T Line Card on page 31
Table 4 on page 6 describes the LED on line cards for EX9200 switches, its colors and
state, and the status it indicates.
, the ports labeled
pic0
, and the ports labeled 2/5
Figure 4 on page 5.
OK/FAIL indicates the status of the line card. See Line
on each MIC indicates the status of the MIC. See
OK/FAIL
Chapter 1: New Topics
through and
0/1 1/5
through and through
1/7 2/3 1/6
through 3/9 and 2/4 through
5.
"Network Port LEDs in an EX9200
0/0
3/8
5