Juniper EX9200 Manual page 77

Table 25: Optical Interface Support for CFP Transceivers in EX9200 Switches (continued)
Ethernet Standard
100GBASE-LR4
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Specification
Model number
Optical interface
Rate
Standard
Transmitter wavelength
Average launch power
Maximum launch power
Average receive power
Receiver saturation
Receiver sensitivity
Fiber type
Core/Cladding size
Distance
DOM support
Software required
Installing a Transceiver in a Switch
Removing a Transceiver from a Switch
EX9200-2C-8XS Line Card on page 25
EX9200-4QS Line Card on page 32
EX9200-6QS Line Card on page 34
EX9200-MPC Line Card on page 3
EX9200-32XS Line Card on page 27
Chapter 2: Updated Common EX9200 Topics
Value
CFP-GEN2-100GBASE-LR4
Single-mode
100 Gbps
IEEE 802.3ba-2010
1294.53 nm through 1296.59 nm
1299.02 nm through 1301.09 nm
1303.54 nm through 1305.63 nm
1308.09 nm through 1310.19 nm
–4.3 dBm through 4.5 dBm
10.5 dBm
–10.6 dBm through 4.5 dBm
4.5 dBm
–10.6 dBm
SMF
9/125 µm
10 km (6.2 miles)
Available
Junos OS for EX Series switches, Release 13.2R1 or
later
61