Juniper EX9200 Manual page 105

Table 36: CLI Equivalents of Terms Used in Documentation for EX9208 Switches (continued)
Hardware
Item (CLI) Description (CLI)
FPM Board Front Panel Display
PEM(n) One of the following:
PS 1.4-2.52 kW;
90-264 V AC in
DC 2.4 kW Power
Entry Module
Routing RE-S-EX9200-1800X4
Engine (n)
CB (n) EX9200-SCBE
FPC (n) Abbreviated name of the
line card
One of the following:
EX9200-2C-8XS
EX9200 4x40G QSFP
EX9200
24x10GE+6x40GE
EX9200-MPC
EX9200 32x10G SFP
EX9200 40x1G
Copper
EX9200-40x1G-SFP
EX9200-40FE
Copyright © 2016, Juniper Networks, Inc.
Value (CLI)
–
n is a value in the range of
0–3. The value corresponds
to the power supply slot
number.
n is a value in the range 0–1.
In base configuration, only
one entry appears.
In redundant configuration,
two entries appear; one for
each Routing Engine module
(RE module) installed in the
chassis.
n is a value in the range of
0–1.
Multiple line items appear in
the CLI if more than one
Switch Fabric modules (SF
modules) are installed in the
chassis.
CB0 and CB1 stand for SF
modules.
n is a value in the range of
0–5. The value corresponds
to the line card slot number
in which the line card is
installed.
Chapter 4: Updated EX9208 Topics
Item in Additional
Documentation Information
Craft Interface "Craft Interface in an
EX9200 Switch" on
page 20
AC or DC power supply AC Power Supply in
an EX9208 Switch
DC Power Supply in
an EX9208 Switch
RE module Routing Engine Module
in an EX9200 Switch
SF module Switch Fabric Module in
an EX9200 Switch
Line card (The switch EX9200-2C-8XS
does not have actual Line Card on page 25
FPCs—the line cards
EX9200-4QS Line
are the FPC equivalents
Card on page 32
on the switch.)
EX9200-6QS Line
Card on page 34
EX9200-MPC Line
Card on page 3
EX9200-32XS Line
Card on page 27
EX9200-40T Line
Card on page 31
EX9200-40F Line
Card on page 28
EX9200-40F-M Line
Card on page 30
89