Removing A Mic From An Ex9200-Mpc Line Card; Figure 8: Installing An Ex9200-40T-Mic - Juniper EX9200 Manual

Related
Documentation

Removing a MIC from an EX9200-MPC Line Card

Copyright © 2016, Juniper Networks, Inc.

Figure 8: Installing an EX9200-40T-MIC

Dual-wide MIC
EX9200-MPC Line Card on page 3
Removing a MIC from an EX9200-MPC Line Card on page 11
EX9200-MPC line card has slots on the faceplate in which you can install the MICs.
EX9200-MPC line card accepts any of the following Modular Interface Cards (MICs):
EX9200-10XS-MIC
EX9200-20F-M-MIC
EX9200-40T-MIC
The MICs are hot-insertable and hot-removable field replacable units (FRUs): You can
remove and replace them without powering off the switch or disrupting switch functions.
However, if you remove a MIC, the interface for that MIC ceases to function.
Before you begin removing a MIC from an EX9200-MPC line card:
Chapter 1: New Topics
11