JRR200 Route Reflector Installation Overview
IN THIS SECTION
Installing and Connecting an JRR200 Route Reflector Installation Overview | 32
Installing and Connecting an JRR200 Route Reflector Installation
Overview
To install and connect a JRR200 Route Reflector:
1. Follow instructions in
2. Install power supplies if they are not pre-installed. See:
•
"Installing a JRR200 Route Reflector AC Power Supply" on page 55
•
"Installing a JRR200 Route Reflector DC Power Supply" on page 58
3. Mount the JRR200 Route Reflector as described in
on page
35.
4. Connect the grounding cable as described in
5. Follow instructions for connecting power as appropriate for your site. See:
•
"Connecting Power to an AC-Powered JRR200 Route Reflector" on page 39
•
"Connecting Power to a DC-Powered JRR200 Route Reflector" on page 41
6. Connect the JRR200 route reflector to external devices as described in
Reflector to External Devices" on page
7. Perform initial configuration by following the instructions in
JRR200 " on page
44.
"Unpacking the JRR200" on page
"Connect the Grounding Cable" on page
43.
33.
"Installing the JRR200 Route Reflector in a Rack"
"Connecting JRR200 Route
"Performing the Initial Configuration for
32
38.