Standards Supported By These Cables; Power Requirements For Ex9200 Switch Components; Table 28: Ex9200 Switch Component Power Requirements - Juniper EX9200 Manual

Standards Supported by These Cables

Related
Documentation

Power Requirements for EX9200 Switch Components

Copyright © 2016, Juniper Networks, Inc.
The cables comply with the following standards:
SFP mechanical standard SFF-843—see
Electrical interface standard SFF-8432—see
SFP+ Multi-Source Alliance (MSA) standards
Pluggable Transceivers Supported on EX Series Switches
Installing a Transceiver in a Switch
Removing a Transceiver from a Switch
Table 28 on page 67 lists the power requirements for different hardware components
of EX9200 switches.

Table 28: EX9200 Switch Component Power Requirements

Component
Base system
Redundant system
Switch Fabric module (SF
module)
Routing Engine module (RE
module)
EX9200-2C-8XS line card
EX9200-4QS line card
EX9200-6QS line card
EX9200-MPC line card
EX9200-10XS-MIC
EX9200-20F-M-MIC
EX9200-40T-MIC
Chapter 2: Updated Common EX9200 Topics
ftp://ftp.seagate.com/sff/SFF-8431.PDF
ftp://ftp.seagate.com/sff/SFF-8432.PDF
Typical Power (watt)
EX9204 switch: 410 W
EX9208 switch: 560 W
EX9214 switch: 1290 W
EX9204 switch: 690 W
EX9208 switch: 800 W
EX9214 switch: 1530 W
150 W
90 W
530 W
408 W
511 W
461 W
29.8 W
37 W
41 W
.
Reserved Power (watt)
EX9204 switch: 410 W
EX9208 switch: 560 W
EX9214 switch: 1670 W
EX9204 switch: 690 W
EX9208 switch: 800 W
EX9214 switch: 1910 W
150 W
90 W
610 W
520 W
607 W
534 W
29.8 W
37 W
41 W
67
.