Ex9200-40F-M Line Card; Line Card Models; Figure 18: Ex9200-40F-M Line Card; Table 16: Ex9200-40F-M Line Card - Juniper EX9200 Manual

Hardware Topics for Aloha Line Card

EX9200-40F-M Line Card

Line Card Models

30
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces in a single assembly. Line cards are field-replaceable units (FRUs) that you
can install in the line card slots on the front of the switch chassis. Line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions.
This topic describes:
Line Card Models on page 30
Line Card Components on page 31
Table 16 on page 30 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 16: EX9200-40F-M Line Card

Model Description
EX9200-40F-M A line card with 40 1-Gigabit Ethernet small
form-factor pluggable (SFP) ports with Media Access
Control Security (MACsec) capability, each of which
can house 1-gigabit small form-factor pluggable
(SFP) transceivers
See Figure 18 on page 30.

Figure 18: EX9200-40F-M Line Card

1— Ejector lever
2— Line card LED
3—MIC LED
You can use the
show version
switches loaded on the switch.
4— LEDs for SFP ports
5— SFP ports with MACsec capability
command to see the version of Junos OS for EX Series
Copyright © 2016, Juniper Networks, Inc.
Junos OS Release
Required
14.2R1 or later