Ex9214 Switch Hardware And Cli Terminology Mapping; Table 40: Cli Equivalents Of Terms Used In Documentation For Ex9214 - Juniper EX9200 Manual

Hardware Topics for Aloha Line Card
Related
Documentation

EX9214 Switch Hardware and CLI Terminology Mapping

Table 40: CLI Equivalents of Terms Used in Documentation for EX9214 Switches
Hardware
Item (CLI) Description (CLI)
Chassis EX9214
Midplane EX9214-BP
FPM Board Front Panel Display
PEM(n) One of the following:
PS 4.1 kW;
200-240 V AC in
DC 2.4 kW Power
Entry Module
Routing RE-S-EX9200-1800X4
Engine (n)
100
Rack Requirements for an EX9200 Switch
Cabinet Requirements for an EX9200 Switch
Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift
Installing and Removing EX9214 Switch Hardware Components
This topic describes the hardware terms used in EX9214 switch documentation and the
corresponding terms used in the Junos OS CLI. See
Value (CLI)
–
–
–
n is a value in the range of
0–3. The value corresponds
to the power supply slot
number.
n is a value in the range 0–1.
In base configuration, only
one entry appears.
In a redundant configuration,
two entries appear; one for
each Routing Engine module
(RE module) installed in the
chassis.
Table 40 on page
Item in
Documentation Additional Information
Switch chassis "Chassis Physical
Specifications of an
EX9214 Switch" on
page 96
Switch midplane Midplane in an EX9200
Switch
Craft interface "Craft Interface in an
EX9200 Switch" on
page 20
AC or DC power supply AC Power Supply in an
EX9214 Switch
DC Power Supply in an
EX9214 Switch
RE module Routing Engine Module in
an EX9200 Switch
Copyright © 2016, Juniper Networks, Inc.
100.