Canon 700 Series Facsimile Manual page 75

13
1 2 3
2
4 5 6
7 8 9
0
Set
14
Set
15
Set
16
1 2 3
4 5 6
7 8 9
0
Set
Set
2-18 Setting Up Coded Speed Dialing
NOTE
• If you want to use access code dialing, you have to register an access code (from
two to five digits) that represents the telephone number you are registering for
coded speed dialing.
• To use access code dialing, you need to set ACCESS CODE to 'USE' from the
SYSTEM SETTINGS menu, and set up the access code key. (See "Setting Up the
Access Code Key," on p. 2-29.)
Enter an access code (from two to five digits) using the
➞
numeric keys press [Set].
If you want to set the time for the transmission, press [
] until <2.TX TIME SETTNG> appears ➞ press [Set].
▲
[
If you do not want to perform this setting, proceed to step 18.
NOTE
• You can set up to five different times in a 24-hour period for sending.
• If you set the timer for a coded speed dialing code, every document you send using
this code is sent at the same time everyday.
] to select a preset time number (1 to 5) ➞ press
▼ ▲
Press [ ] or [
[Set].
Enter the time in 24-hour notation using the numeric keys
(e.g., 1:00 p.m. as 13:00) ➞ press [Set].
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
➞
➞
➞
➞
▼
] or