Canon 700 Series Facsimile Manual page 210

5. TIME SETUP
6. PRINT RX DOC.
An asterisk (*) indicates the default setting.
8
Stop
Press [Stop] to return to the Standby mode.
Setting
Sets the time for the machine to enter and leave the
Transfer mode. If you do not set the timer, you can still
switch the Transfer mode ON/OFF manually.
1.START TIME Sets a specified time for the machine to automatically start
the transfer operation.
EVERYDAY* Sets the machine to start the transfer operation everyday. You
can set up to five start times for every day of the week.
SELECT DAYS 1.SUN to 7.SAT
Sets the machine to start the transfer operation only on
selected days of the week. You can set up to five start times
for any of the selected days.
2.END TIME Sets a specified time for the machine to end the transfer
operation, and return to normal operations.
EVERYDAY* Sets the machine to end the transfer operation everyday.
You can set up to five end times for every day of the week.
SELECT DAYS 1.SUN to 7.SAT
Sets the machine to end the transfer operation on the
selected days of the week. You can set up to five end times
for any day that you select.
If your machine is the transfer unit, this setting determines if
your machine prints a copy of every document it transfers.
OFF* Received and transferred documents are not printed at the
transfer unit.
ON A copy of every document received and transferred is
printed at the transfer unit.
# OF RX If you turn PRINT RX DOC 'ON', use this setting to specify
COPIES the number of copies you want to print (01 to 99). Use the
numeric keys to enter the number, or press [▼] or [▲] to
increase or decrease the number ➞ press [Set].
Default setting: '01COPIES'*
Description
Transferring Documents
9
9-5