Canon 700 Series Facsimile Manual page 349

I
In Use/Memory lamp
ITU-T
J
Jack
L
Long distance dialing
M
Manual receiving
Manual redialing
14
14-12 Glossary
Flashes green when the telephone line is in use or when you are receiving a
document. Maintains a steady green light when there are documents stored in
memory.
See also CCITT/ITU-T.
The telephone line receptacles on your wall and on the side of the main unit used to
connect your machine to the telephone line, handset, or extension telephone.
When dialing or registering long distance numbers, you sometimes have to insert a
pause either within or after the telephone number. The destination and length of the
pause differ depending on the system. Contact your local authorized Canon dealer or
your local telephone company for further information if you experience problems with
long distance dialing.
Use this setting if you have installed the optional handset kit and there is only one line
connected to your office which you use for both telephone and fax communication,
and you want to monitor all incoming calls yourself. When you hear the telephone
ring, pick up the handset and answer the telephone call. If you hear a slow beep,
someone is trying to send you a facsimile transmission. Press [Start], and hang up
the handset to start receiving the document. You cannot receive documents if there is
another document being fed into the machine.
When you use regular dialing, you can redial a number manually, simply by pressing
[Redial/Pause] on the operation panel. The last number called is the number redialed.