Canon 700 Series Facsimile Manual page 355

Restricted reception
Rotary pulse
RX password
S
Scanning area
Sender's name
Sending speed
Sequential broadcasting
Smoothing
14
Stamp
14-18 Glossary
The ability of the machine to restrict incoming documents. With this feature turned
ON, the machine receives documents only from speed dialing numbers registered in
your machine.
A rotary pulse or pulse dial telephone is dialed by manually rotating a dial to send
pulses to the telephone switching system. When you pulse dial, you hear clicks. With
tone dialing, you hear tones.
The ITU-T password set on your machine to match the ITU-T password of all
incoming documents. If your RX password matches the ITU-T password of the
incoming transmission, the document is received. If the passwords do not match, the
document is not received. The maximum length of a password is 20 digits and may
consist of numbers, spaces, asterisks (
The scanning area is narrower than the original document size around the entire
border, around the document. Documents you send should have some margin on the
sides and the top and bottom. Anything over this margin cannot be scanned for
sending.
Your name or company's name, your fax number, date and time the document was
sent to the receiving party are printed on each page you send. You can register up to
99 sender's names that can be selected with [TTI Selector] before sending. Your
name and facsimile number are printed at the top of the documents that you send.
The rate at which documents are sent over the telephone line. See also bps.
Enables you to send one scanned document to up to 210 destinations by using
one-touch speed dialing, coded speed dialing, and regular dialing. Dial several
numbers to send the document. If you do this frequently, you should register the
numbers for group dialing.
Even if the image you receive from the other party's fax machine is of poor quality,
your machine smooths the image to produce a better quality image.
The optional stamp feature marks documents that have been scanned for
transmission with a yellow circle stamped at the lower left side of the document.
), and pound marks (#).