Canon 700 Series Facsimile Manual page 73

5
Coded Dial
1 2 3
4 5 6
7 8 9
0
Set
2
6
Set
7
1 2 3
4 5 6
7 8 9
0
Set
8
Set
2-16 Setting Up Coded Speed Dialing
Press [Coded Dial] ➞ enter a three digit code (000 to 127)
using the numeric keys ➞ press [Set].
You can also press [▼] or [▲] to specify a coded speed dialing code ➞ press
[Set].
NOTE
If a telephone number is already registered for the three digit coded speed dialing
code, that number is displayed. If the code is registered for group dialing, <GROUP
DIAL> appears on the LCD display.
] until <1.TEL NUMBER ENTRY> appears ➞
▼ ▲
Press [ ] or [
press [Set].
Enter the telephone number (up to 120 digits) using the
numeric keys ➞ press [Set].
To enter a space, press [Space]. Spaces are optional and ignored during dialing.
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
NOTE
• To correct the entered number, press [ ] to move the cursor to the digit you want to
correct ➞ press [Delete] ➞ enter the correct number.
• If you make a mistake, press
number.
] until <2.NAME> appears ➞ press [Set].
▼ ▲
Press [ ] or [
➞
➞
➞
(Clear) to delete the number ➞ enter the correct
C
➞