Canon 700 Series Facsimile Manual page 260

Feature
ECM Sending/ ECM TX
Receiving ECM RX
Energy Saver ENERGY SAVER
Language DISPLAY
LANGUAGE
Manual Receiving REMOTE RX
with an Extension
Telephone
Offhook Alarm OFFHOOK ALARM
Pause Length PAUSE TIME
PIN Codes PIN CODE
Printing: Continue TONER SUPPLY
Printing with Toner LOW
Supply Low
Printing: Footer on RX PAGE FOOTER
Printed Documents
Program One-Touch PROG 1-TOUCH
Key KEY
Receiving Password RX PASSWORD
Menu Item
The machine is set to conduct all transactions using
ECM (Error Correction Mode). If transmission speed
appears to be extremely slow, you may be able to speed
up transmission time by turning ECM 'OFF'. (See "TX
(Send) Settings," on p. 11-14, or "RX (Receive)
Settings," on p. 11-17.)
If the machine remains idle for a specified time period, it
enters the Energy Saver mode. If your machine is idle
for three minutes, the machine enters the Energy Saver
mode. (See Chapter 5, "Summary of Important
Settings," in the Reference Guide.)
The initial display language is English. Spanish, French,
and Portuguese are also available. (See Chapter 5,
"Summary of Important Settings," in the Reference
Guide.)
To start receiving a fax manually by answering an
extension telephone connected to the machine, dial 25.
You can change this number if necessary. (See "RX
(Receive) Settings," on p. 11-17.)
If the handset remains off the hook, an alarm sounds.
The volume of this alarm can be adjusted, or it can be
turned 'OFF'. (See "User Settings," on p. 11-5.)
A pause entered within a number is set for two seconds.
You can lengthen this pause up to 15 seconds. A pause
entered at the end of a number is fixed at 10 seconds,
and cannot be adjusted. (See "TX (Send) Settings," on
p. 11-14.)
The PIN Code feature is disabled unless you turn it 'ON'
and set up the machine for dialing through a PBX
(Private Branch Exchange) with PIN codes. (See "TX
(Send) Settings," on p. 11-14.)
When the toner supply runs low, the machine saves the
remainder of the document in memory. You can set the
machine to continue printing even after the <TONER
SUPPLY LOW> message appears during printing. (See
"Printer Settings," on p. 11-19.)
The machine does not print a footer on every document
received unless you turn this feature 'ON'. (See "RX
(Receive) Settings," on p. 11-17.)
If you press the designated one-touch speed dialing key
under which a function is assigned before you start a
transmission, the machine automatically performs that
function. (See "User Settings," on p. 11-5.)
No receiving password is set until you set one. If the
other party regularly sends you documents only with an
ITU-T password and no subaddress, set up an RX
password. (See "System Settings," on p. 11-29.)
How the Machine Operates with Default Settings
Description of Default
10
10-23