Receiving Documents - Canon 700 Series Facsimile Manual

Receiving Documents

Cannot receive documents automatically.
Cause
Remedy
Cannot receive documents manually.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
The documents you receive are of poor quality.
Cause 1
Remedy
Cause 2
Remedy
13
Cannot receive a confidential document in your confidential mailbox.
Cause
13-18 When Trouble Occurs
<MAN.> is displayed.
Set RECEIVE MODE to 'AUTO RX' from the RX SETTINGS menu. (See
Chapter 4, "Receiving Documents.")
There is a document set in the ADF (Automatic Document Feeder).
You cannot receive if there is a document set in the Automatic Document
Feeder. Remove the document and try again.
<AUTO> is displayed.
Set the RECEIVE MODE to 'MANUAL RX' in the RX SETTINGS menu. (See
"Receiving Documents Manually," on p. 4-4.)
You pressed [Start] after you hung up the handset.
When you hear a high pitched tone, press [Start] before you hang up the
handset. Review the procedure for manual receiving with the optional handset
kit installed on the machine. (See "Receiving Documents Manually," on p. 4-4.)
Your toner cartridge is running low on toner.
Remove your toner cartridge and rotate it five or six times to evenly distribute
the remaining toner, and try receiving the document again. If this does not solve
the problem, you should change the toner cartridge. (See Chapter 6,
"Maintenance," in the Reference Guide.)
The other fax machine is not functioning properly.
The sending fax machine usually determines the image quality. Try copying a
document on your own machine. If the copy is clean, then the other fax machine
has a problem. Call the other party and ask them to clean the scanning glass on
their fax machine.
The other party's fax machine does not support ITU-T subaddress/password
transactions.