Using Regular Dialing - Canon 700 Series Facsimile Manual

Using Regular Dialing

When you come to a step that requires dialing a number, you can dial the number
with the keys on the numeric keypad, just like you would when dialing a telephone
number. This is called "regular dialing."
NOTE
To make dialing easier, register frequently used numbers to the one-touch speed dialing
3
keys or coded speed dialing codes. (See "Using Speed Dialing," on p. 2-32.)
1
2
1 2 3
4 5 6
7 8 9
0
3
Start
3-8

Using Regular Dialing

Place your documents on the machine.
For instructions explaining how to place your documents, see "Setting the
Document on the Machine," on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
"Adjusting the Scan Settings," on p. 3-4.)
• You can also specify a sender's name with [TTI Selector]. (See "Selecting a
Sender's Name," on p. 3-6.)
Dial the telephone number using the numeric keys.
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.
(Clear) to clear the entire telephone number ➞ begin
• You can also use
C
entering the telephone number again.
• If you notice that you made a mistake while the machine is dialing the number,
(Stop) to return to the Standby mode ➞ start again.
press
Press [Start].
The machine starts scanning the first page into memory.