Canon 700 Series Facsimile Manual page 325

MEMORY FULL
Cause
Remedy 1 If the document has been received in memory, print the document. (See
Remedy 2 If documents have been received in confidential mailboxes, print them. (See
Remedy 3 Check the contents of the memory. If there are unnecessary documents stored
Remedy 4 If you tried to send a document with the 'Ultra Fine', 'Super Fine', or 'Text/Photo'
MEMORY FULL PLEASE WAIT
Cause
Remedy
NO DOC. STORED
Cause
Remedy
NOT AVAILABLE NOW
Cause 1
Remedy
Cause 2
13
Remedy
13-10 List of LCD Display Messages (Alphabetical List)
The memory is full.
"Printing a Document in Memory," on p. 9-18.)
"Receiving a Confidential Document," on p. 7-10.)
in memory, delete them. (See "Erasing a Document from Memory," on p. 9-22.)
document setting, try using the Direct Sending method, or set the resolution to
'Fine' or 'Text', and send the document using Memory Sending.
The memory is full.
Wait until the current document transmission is completed. Try sending your
document again when the current transmission is complete.
You tried to check the contents of the memory, but no documents are currently
stored in memory.
Store documents if necessary.
You pressed a one-touch speed dialing or [Coded Dial] followed by a three digit
code that is not registered for the feature you are trying to use.
Try again without using the feature, or assign the feature to the one-touch speed
dialing key or coded speed dialing code.
When using Manual Sending, you pressed a one-touch speed dialing key or
coded speed dialing code under which a group for group dialing has been
registered.
Try sending your document with a one-touch speed dialing key or coded speed
dialing code under which a group is not registered.