Changing The Preset Polling Settings - Canon 700 Series Facsimile Manual

Set
1 2 3
4 5 6
7 8 9
0
Set
8
Stop 15

Changing the Preset Polling Settings

Follow this procedure to change the settings of the preset polling setup file.
1
Data
Registration
Set
8-10 Polling Other Fax Machines to Receive a Document
❏ Press [▼] or [▲] to display an empty setting column ➞ press [Set].
❏ Enter the time for your machine to poll other fax machines using the numeric
keys ➞ press [Set].
Enter the time in 24-hour notation (e.g., 1:00 p.m. as 13:00).
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
❏ If you want to set more than one time for your machine to poll other fax
machines on the selected day, set the day of the week and the time in another
empty setting column.
NOTE
• You can register up to five times for your machine to poll other fax machines on the
selected day.
• If you want to select another day, press [Data Registration] to return to the previous
level, and select another day. Repeat the procedure for setting the times for that
day.
• If you make a mistake when entering the time, press
number ➞ enter the correct time.
Press [Stop] to return to the Standby mode.
Open all three one-touch speed dialing panels ➞ press [Data
Registration] ➞ [
▼
press [Set].
If necessary, see steps 1 to 3 of "Polling to Receive at a Preset Time," on p. 8-5.
➞
➞
] until <3.FAX SETTINGS> appears ➞
▲
] or [
(Clear) to clear the
C