List Of Lcd Display Messages (Alphabetical List) - Canon 700 Series Facsimile Manual

List of LCD Display Messages
Below is a list of messages that are displayed on the screen when a problem
occurs in the machine.
# ALREADY IN USE
Cause
Remedy
AUTO REDIAL
Cause
Remedy
CHECK DOCUMENT
Cause
Remedy 1 Clear the paper jam, and try placing the document again. (See Chapter 7,
Remedy 2 If the document does not feed correctly, clean the rollers. (See Chapter 7,
CHECK PRINTER
Cause
13
Remedy
13-8

List of LCD Display Messages (Alphabetical List)

The box number you entered is already in use. For example, you cannot use the
same box number for a confidential mailbox and a polling box.
Select another box number.
The other party's line was busy on the previous dialing attempt and your
machine is dialing the number again.
To cancel redialing, press [Stop] if you are using Direct Sending. If you are using
Memory Sending, press [Delete File] ➞ select the transaction number ➞ press
[Set].
A document page may be jammed or may not have been fed correctly by the
ADF (Automatic Document Feeder).
"Troubleshooting," in the Reference Guide.)
"Troubleshooting," in the Reference Guide.)
Printer malfunction.
Press [Stop]. Disconnect the machine from its power source, wait a few minutes,
then connect the power cord to the power outlet. If the machine is connected to
a UPS (Uninterruptable Power Source), disconnect the power cord, and plug it
into an AC outlet. If the message remains on the LCD display and the machine
does not return to the Standby mode, call your local authorized Canon dealer.
(Alphabetical List)