Forced Pin Code Access - Canon 700 Series Facsimile Manual

4
1 2 3
Enter the PIN code (up to 20 digits) using the numeric keys.
4 5 6
The PIN code is not displayed as you enter it.
7 8 9
0
5
Press [Set].
Set
Transmission starts.

Forced PIN Code Access

Follow this procedure to dial when Forced PIN Code Access (NECESS. PIN
CODE) has been turned 'ON'. With Forced PIN Code Access 'ON', you must enter
a PIN code every time you dial. The PIN code must be entered either before or after
the number, depending on how PIN code access has been set up. (See "Setting a
PIN Code," on p. 10-6.)
1
Place your documents on the machine.
For instructions explaining how to place your documents, see "Setting the
Document on the Machine," on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
"Adjusting the Scan Settings," on p. 3-4.)
• You can also specify a sender's name with [TTI Selector]. (See "Selecting a
Sender's Name," on p. 3-6.)
Setting Up and Using PIN Codes
10
10-13