Setting Up The Access Code Key - Canon 700 Series Facsimile Manual

Setting Up the Access Code Key

Follow the procedure below to assign an access code (from two to five digits) to
represent a fax number. You can assign the access code key to [#] or any one-touch
speed dialing key. Also, you can set the number of characters used for an access
code.
1
Open all three one-touch speed dialing panels.
2
Data
Press [Data Registration].
Registration
3
Press [
Set
[Set].
4
Press [
Set
[Set].
If the prompt <SYSTEM SETTINGS PASSWORD> appears on the LCD display,
enter the system administrator's password using the numeric keys ➞
press
] until <3.FAX SETTINGS> appears ➞ press
▼ ▲
] or [
] until <7.SYSTEM SETTINGS> appears ➞ press
▼ ▲
] or [
(Set).
Set
➞
➞

Setting Up the Access Code Key

2
2-29