Canon 700 Series Facsimile Manual page 71

Set
28
Set
2
29
Set
30
Stop
31
2-14 Setting Up One-Touch Speed Dialing
●
If you select 'FIXED':
❏ Press [▼] or [▲] to select a line ➞ press [Set].
If you want to select a sender name, press [
<8.SENDER NAME> appears ➞ press [Set].
If you do not want to perform this setting, proceed to step 30.
] to select a sender name ➞ press [Set].
▼ ▲
Press [ ] or [
If you want to set up other one-touch speed dialing keys, repeat this procedure
from step 2.
This completes all the optional settings for a one-touch speed dialing key.
NOTE
To perform this setting, you had to previously register sender's names.
Press [Stop] to return to the Standby mode.
After you register a number for one-touch speed dialing, make
sure you write the name of the other party on a destination
label, and adhere it to the one-touch speed dialing panel
below the number of the one-touch speed dialing key where
the number is registered.
➞
▼
] or [
➞
➞
▲
] until