Canon 700 Series Facsimile Manual page 327

Canon facsimile user guide
Hide thumbs Also See for 700 Series:
Table of Contents

Advertisement

RECEIVED IN MEMORY
Cause
Remedy
REPLACE CARTRIDGE
Cause
Remedy
START AGAIN
Cause
Remedy 1 Start the procedure from the beginning.
Remedy 2 If the problem persists, call your local authorized Canon dealer for service.
STOP KEY PRESSED/PRESS SET KEY
Cause
Remedy
SUPPLY REC. PAPER
Cause
Remedy
TRANSMITTING PLEASE WAIT
Cause
13
Remedy
13-12
List of LCD Display Messages (Alphabetical List)
The machine has run out of recording paper, the toner supply in the toner
cartridge needs to be replaced, or the output tray is full of paper.
Load paper into the paper cassettes, change the toner cartridge, or pick up the
printed pages in the tray. Once one of these tasks are completed, the document
prints automatically. (See "When the Machine Displays <RECEIVED IN
MEMORY>," on p. 9-15.)
The toner cartridge has run out of toner.
Replace the toner cartridge. (See Chapter 6, "Maintenance," in the Reference
Guide.)
An error has occurred in the telephone line or in your machine.
You pressed [Stop] to cancel the current transaction.
Press [Set] to return the machine to the Standby mode.
Your machine has run out of paper.
Reload the paper cassettes. (See Chapter 6, "Maintenance," in the Reference
Guide.)
You tried to use direct sending while the machine was sending another document.
Wait until the transmission is finished, then try sending your document again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

730i - laser class b/w laser

Table of Contents