Canon 700 Series Facsimile Manual page 127

4
Start
3
5
TTI
Selector
Set
3-30 Sending Documents at a Preset Time
Specify the destinations ➞ press [Start].
You can specify up to 210 destinations using regular dialing, one-touch speed
dialing, coded speed dialing, access code dialing, or directory dialing. (See
"Using Regular Dialing," on p. 3-8, "Using Speed Dialing," on p. 2-32, or "Using
Directory Dialing," on p. 2-39.)
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.
(Clear) to clear the entire telephone number ➞ begin
• You can also use
C
entering the telephone number again.
• If you notice that you made a mistake while the machine is dialing the number,
(Stop) to return to the Standby mode ➞ start again.
press
• You can press more than one speed dialing key to send the document to more than
one location after the timer goes off. If you want to enter the numbers with regular
dialing for a sequential broadcast, make sure you press
number.
If you want to select a sender's name, press [TTI Selector] ➞
▼ ▲
[ ] or [ ] until the sender's name you want to use appears.
You can also use the numeric keys to select a sender's name.
If you do not want to select a sender's name, proceed to step 6.
➞
(Set) after every
Set
➞